V14 Modbo modchip installation diagram

One of the revisions of the slim PlayStation 2 was the V14. They were found in SCPH-7500x models available worldwide. These were the very first version of the PS2 slims that had a reduced number of compatible PS1 and PS2 games. Matching console model numbers and board numbers are listed below.

You can find the model number on the sticker on the bottom of the console, and the board number is printed on the PS2 main board if you take apart your console. Note that there can be multiple board numbers within a specific model number.

• NTSC-J (Japan):
  • SCPH-75000 CW (GH-036-51)
  • SCPH-75000 SS (GH-037-12)
• NTSC-U/C (USA)
  • SCPH-75001 (GH-032-32, GH-036-51, GH-037-01, GH-040-51)
• PAL
  • SCPH-75002 (GH-041-14)
  • SCPH-75002A (GH-041-14)
  • SCPH-75003 (GH-041-14)
  • SCPH-75004 (GH-040-12, GH-041-04, GH-041-14)

Note that there are multiple versions of the Modbo modchips available, but the installation diagrams are all the same. Some example versions are Modbo 3.0, Modbo 4.0, Modbo 5.0, and Modbo 750.

For more information about Modbo modchips click here, for more information about PS2 modchips in general click here.

V14 Modbo installation diagram

There are a lot of diagrams out there for this model. I’ve included all of the diagrams I have, but will likely be removing the ones that appear to be duplicates in the future.

        

Installation tips

Here are some tips I have for you when you are soldering your chip into a V14.

• Using 30 AWG solid core wire works well for most of the points.
• Use some thicker wire for the 5V and ground wires.
• Make sure wherever you are putting your chip won’t cause any issues when putting the system back together, PS2 slims fit together very tightly.

Diagram success rate

Here’s a list of people who have successfully modded their console with this diagram. Leave a comment and I’ll add you to the list.

1. Nobody yet

Example installations

This section has photos of some successful installations which you can use to get a better understanding of how everything is wired and positioned. Leave a comment and I’ll add your installation to the list

1. Nobody yet